Recently added

MIST Central Library Repository

Repository at MIST Central Library: Recent submissions

  • Abdus Salam, Gp.Capt. (BAF); NC Chattopadhyay, Gp.Capt. (IAF); Tasnim, Nazifa; Bin Hossain, Asif (R&D Wing, MIST, 2013-02)
    Aircraft noise has been an issue of enormous environmental, financial, and technological impact. FAA statistics has forecast that aviation is likely to grow over the next 20 years at an average rate of 3.8% per year [1] ...
  • NC Chattopadyay, Gp Capt.(IAF); Jony, Bodiuzzaman; Acharya, Anup (R&D Wing, MIST, 2013-02)
    Since the inception of the first flight by Wright brothers, the aerodynamicist had been focusing on improvement of aircraft performance through suitable alteration of design parameters. Most promising geometrical parameter ...
  • Jahangir Alam, Wing Commander G.M.; Mamun, Dr. Md.; Abu. Taher Ali, Dr. Md.; Sadrul Islam, Dr. A. K. M. (R&D Wing, MIST, 2013-02)
    This paper explains about the computational design procedure for designing of an Unmanned Air Vehicles (UAV) having “Aerofoil Shaped Fuselage”. It also explains and analyses of the aerodynamic characteristics of an “Aerofoil ...
  • Khandakar Akhter Hossain, Cdr Khandakar Akhter Hossain, BN (R&D Wing, MIST, 2013-02)
    Shipbuilding is a low-tech and capital intensive industry. Shipbuilding is both promising and challenging industry in the World. Total global shipbuilding market size is US$ 1600 billion. If only 1% market share can be ...
  • Nikhil Verma, WgCdr(IAF); Easir Arafat Papon, Md. (R&D Wing, MIST, 2013-02)
    This paper describes the need and advantages of WDM optical network and its technical specifications to show it as a reliable and modular system to use in aircrafts. The paper explains the development in Avionics Optical ...
  • Md. Afzal Hossain, Gp Capt (R&D Wing, MIST, 2013-02)
    An emerging IT development, deployment, and delivery model that enables real-time delivery of a broad range of IT products, services and solutions over the internet is known as ‘Cloud Computing’. The concept and service ...
  • ASHIQUZZAMAN, M.; B. HOSSEN, SK.; HOSSAIN, F M Z. (R&D Wing, MIST, 2013-02)
    One of the major challenges of our present society is to construct the environment friendly structures with low cost technology. The use of recycled aggregates from construction sites and demolished concrete wastes is ...
  • Ghose Sagar, Shantanu; Saha, Niloy (R&D Wing, MIST, 2013-02)
    For effective transportation planning and management, determination of congestion index based on real time traffic information is very effective. This paper is objected to extract traffic information and asses the congestion ...
  • Kabir, Ahsanul; DSM Shahddeul Islam, Colonel (R&D Wing, MIST, 2012-02)
    This is an attempt to carry out nonlinear analysis of reinforced concrete flat plates using 3 D-Brick elements in combination with Link elements. A 3-dimensional reinforced concrete flat plate model is generated. The ...
  • Md Abdus Salam, Gp Capt (BAF); NC Chattopadhyay, Gp Capt (IAF) (R&D Wing, MIST, 2012-02)
    From the beginning of twentieth century, aviation has witnessed sea changes due to advent of technology, change in military doctrine, socio-economic changes and change in perspective of human needs. Military and commercial ...
  • Md Gazi Ferooz Rahman, Brigadier General; Shamsuddoha, Md. (R&D Wing, MIST, 2012-02)
    Cement is the most common construction materials. It is expected that finer cement provides larger surface area for hydration thus sets early. But, due to other contents like fillers, gypsum etc. this phenomenon can be ...
  • Md Hossam-E-Haider, Wg Cdr Dr; Fardous Popy, Jannatul (R&D Wing, MIST, 2012-02)
    For a more precise detection of an object by radar, it is important to understand the significance of RCS prediction. Accurate prediction of RCS is critical in order to design and develop robust discrimination algorithms. ...
  • M A Mohy, Colonel (R&D Wing, MIST, 2012-02)
    This study is undertaken to find out the feasibility of using geojute materials produced in Bangladesh as an alternative to geotextiles in civil engineering applications. Four types of untreated and three types of treated ...
  • Kumar Dhar, Pranab; Ibrahim Khan, Mohammad; Chowdhury, Sujan (R&D Wing, MIST, 2011-02)
    Digital watermarking has drawn extensive attention for copyright protection of multimedia data. This paper proposes a new watermarking system for digital images using efficient systematic linear block codes (SLBC) in ...
  • Jahan Rashid Pinky, Lubna; Naim Rakib Ahmed, Abu (R&D Wing, MIST, 2011-02)
    A mathematical model is proposed to determine the photoelastic constants in arbitrary crystal orientation of Zincblende crystal structure. Tensor rotation technique is applied using Euler’s rotation theorem to develop the ...
  • Das, C. K.; Das, N. K.; Islam, M. M.; Sazzad Hossain, S.M. (R&D Wing, MIST, 2011-02)
    A virtual power plant is a cluster of distributed generation installations (such as microchip, wind-turbines, small hydro, back-up genets etc.) which are collectively run by a central control entity. The concerted operational ...
  • Moinul Islam, Md.; Saiful Islam, Dr.Md.; Aftabur Rahman, Md. (R&D Wing, MIST, 2011-02)
    This paper presents an experimental investigation carried out to study the effects of Ground Granulated Blast Furnace Slag (GGBFS) on strength development of mortar and the optimum use of slag in mortar. Cement was partially ...
  • Sharif Md Abul Hussain Dir, Lt Colonel (R&D Wing, MIST, 2011-02)
    The study investigates specific information regarding the challenges of globalization faced by Bangladesh and how it should prepare itself to coup with the challenges. The result suggest that Bangladesh is not in comfort ...
  • Khuda, S.N.; Anwar, A.M.M.T. (R&D Wing, MIST, 2011-02)
    Analysis and design of beam is still an important part in Structural Engineering practice. As a major component in structure, it demands due attention and accuracy. At the same time engineers need to achieve economy in ...
  • Das, N.K.; BN, Capt. M.Ziauddin Alamgir; Das, C.K.; Hasan, M. M.; Rahman, M. M.; Alam, M. F. (R&D Wing, MIST, 2011-02)
    The use of computer interfacing systems for controlling the device is spreading at an increasingly fast pace, with analogous wired system being substituted by computer interfaced systems alternatives in growing number of ...

Search DSpace

Browse

My Account