• FABRICATION AND PERFORMANCE EVALUATION OF LOW COST HIGH IMPACT RESISTANT COMPOSITE 

  RAHMAN, MD. ANISUR (Department of Mechanical Engineering, MIST, 2023-03)

  In this thesis low cost composite laminates were fabricated and their effectiveness against high impact was assessed. Glass fiber was used as the fiber and epoxy resin as the binder to create composite laminates. For ...
• ANALYSIS OF MAGNETIC FIELD EFFECT ON PULSATING BLOOD FLOW IN ARTERIES 

  OISHE, SADIA NOON (Department of Mechanical Engineering, MIST, 2022-04)

  Cardiovascular diseases including strokes, heart attacks, Stenosis, and atherosclerosis are considered the leading cause of death over the globe. The aorta, coronary, carotid, and femoral arteries are the most commonly ...
• Numerical and Experimental Investigation of Non-Circular Free Jet with and without Peripheral Twist for Improvement in Mass Entrainment, Mixing and Turbulence Characteristics 

  Rahman Evan, Md.Touhidur (DEPARTMENT OF MECHANICAL ENGINEERING, 2018-12)

  Free jet flow is a basic flow configuration found in wide range of applications, majority of them being mixing, heating or cooling. The present study is therefore focused to improve the performance of the free turbulent ...
• PREDICTION OF FLUID FLOW AROUND 2D SQUARE OBJECTS INSIDE A DOUBLE LID DRIVEN CAVITY USING CFD AND ARTIFICIAL NEURAL NETWORK 

  YASIR, MD. ATIF (DEPARTMENT OF MECHANICAL ENGINEERING, 2021-03)

  Using computational fluid dynamics (CFD) to solve fluid flow problems can use a lot of computer processing power and simulation time. Artificial neural networks (ANN) can be regarded as universal learners that are capable ...
• PERFORMANCE ANALYSIS OF WIND TURBINES WITH TIP VANES 

  KHAN, NAFIZ AHMED (DEPARTMENT OF MECHANICAL ENGINEERING, 2021-07)

  Performance enhancement of horizontal axis wind turbine (HAWT) with circular arc blade section (CABS) has been investigated both experimentally and computationally using upstream and downstream tip-vanes (winglet) ...
• FABRICATION OF A LOW TEMPERATURE DIFFERENTIAL STIRLING ENGINE 

  ALAM, MD. KHURSHED; ISLAM, MD. ARAFAT; UDDIN, MD. AHSAN (DEPARTMENT OF MECHANICAL ENGINEERING, 2009-12)

  In recent years, understanding of the stirling engine has enjoyed considerable growth. Research and development on the stirling engine has steady progressed, and many new insights, inventions, and potential applications ...
• PERFORMANCE EVALUATION OF SOLAR FLAT PLATE COLLECTOR 

  Alam, Capt. Alija; Uddin, Minhaz; Haque, Md. Nazmul (DEPARTMENT OF MECHANICAL ENGINEERING, 2017-12)

  The analysis of thermal performance of the flat-plate collector includes parameters such as solar intensity, ambient temperature and configuration of flat-plate collectors etc. In this paper, the effect of the parameter ...
• ENHANCEMENT OF HEAT TRANSFER IN A PIPE FLOW USING A SWIRLING PERFORATED TWISTED TAPE INSERT 

  Noon Oishe, Sadia; Rahman, Md. Mostafizur; Ahmad, Shahrokh; Bin Ehtesham, Md. Sakib (DEPARTMENT OF MECHANICAL ENGINEERING, 2017-12)

  With the advancement of science and technology heat transfer enhancement has become an important term in the field of engineering research since the effectiveness of heat exchangers are increasing through suitable heat ...
• EXPERIMENTAL INVESTIGATION ON COUNTERFLOW INDUCED DRAFT COOLING TOWER AND PERFORMANCE ANALYSIS 

  Akter Joty, Mahmuda; Sharar, Shadman; Hosaain Khan, Md. Solaiman (DEPARTMENT OF MECHANICAL ENGINEERING, 2017-12)

  Cooled water is necessary for air conditioners, manufacturing processes, power generation and many other purposes. Cooling tower is an equipment used to reduce the temperature of water by extracting heat from water and ...
• Design and Fabrication of a Vapor Absorption Refrigeration System for Vehicle Cabin Cooling Utilizing Exhaust heat 

  Islam, Muhammad Momotazul; Bhowmick, Suvro; Ishtiaque, Jabid (DEPARTMENT OF MECHANICAL ENGINEERING, 2017-12)

  Automobile air-conditioning is a necessity of present life. Designing energy efficient and cost effective products are the main challenge in modern world. From that perspective when we look at a vehicle air conditioning ...
• Flat Plate Solar Collectors for water pre-heating using Concentrated Solar Power (CSP) 

  Sarkar, Lt Imran; Shekh, Md. Al Amin; Peris, Leonard Sunny (DEPARTMENT OF MECHANICAL ENGINEERING, 2017-12)

  Conventional energy sources through-out the world are soon going to be exhausted. Millennium Development Goal (MDG) by United Nation (UN) vision and aim now reflects upon numerous attempt and experiment conduction on ...
• Comparative Analysis of Wear Behaviour of Commercial Polymeric Pipe Materials under Different Sliding Environments 

  Labonee, Monzila Farzana; Rahman, Mohammed Sajidur; Fazlullah, Fahim (DEPARTMENT OF MECHANICAL ENGINEERING, 2017-12)

  The current study was conducted to compare the wear behaviour and frictional nature of three commonly used commercial polymers namely, uPVC (Unplasticized polyvinyl chloride), High Density Polyethylene (HDPE) and Acrylic. ...
• DEVELOPMENT AND PERFORMANCE ANALYSIS OF AN AUTOMATIC THROWING ROBOT WITH AN INTEGRATED METHOD FOR DESTINATION DETECTION 

  Hossain, Sanzida; zzaman, Nahidu; Islam Akand, Md. Mazharul (2017-12)

  A robot is a machine that can perform a certain task given to it automatically. It may perform various task as its design. Among all the task a robot can perform throwing is an important one. Our aim was to understand ...
• DESIGN AND CONSTRUCTION OF A MECHANICAL MOTION RECTIFIER (MMR) 

  Islam, Md. Muzahidul; Rahman Khan, Aurko; Alam, Sarwar (DEPARTMENT OF MECHANICAL ENGINEERING, 2017-12)

  The mechanical rectifier is used to convert bidirectional reciprocating motion into unidirectional rotating motion. In this project we have used two input shafts and one output shaft. The rack and pinion mechanism is ...
• Study of an Optimization Design and Analysis for Stair Climbing Lift 

  Omar, Md. Arman; Quadir Ayon, Arif; Hossain Bhuiyan, Md. Ashraf (DEPARTMENT OF MECHANICAL ENGINEERING, 2017-12)

  A stairlift is a mechanical device for lifting man and material up and down on the stairs, who may find difficulty in doing so themselves. A stairlift can be used as Material Handling System. For sufficiently wide stairs, ...
• DESIGN, CONSTRUCTION AND PERFORMANCE STUDY OF AN INDIRECT TYPE SOLAR DRYER FOR FOOD PRESERVATION 

  Rahman, Md. Mashiur; Rahman, Md. Moshiur; Salam, Kazi Afif (DEPARTMENT OF MECHANICAL ENGINEERING, 2017-12)

  Utilizing the most abundant and free of cost energy of the sun to heat up the air and to use that heated air to dry foods is the main goal of this thesis. In order to do this an indirect type forced convection solar dryer ...
• EXPERIMENTAL STUDY ON THE PERFORMANCE OF MECHANICAL INDUCED DRAFT COOLING TOWER USING DIFFERENT QUANTITY OF CIRCULATING FLUIDS 

  Adnan Bin Rahman, Maj. Sayem; Rahman, Md. Monjur; Khadem, Alimul (DEPARTMENT OF MECHANICAL ENGINEERING, 2017-12)

  Cooling towers are evaporative heat transfer devices in which atmospheric air cools warm water with direct contact between the air and the water by evaporating cooling of water. The main objective of this study is to ...
• STUDY OF IMPACT OF JET ON DIFFERENT VANES FOR MEASURING FLOW RATE AND IMPACT FORCE 

  Hossain, Farzad; Morshed Tithi, Afshana; Sultana Setu, Rifat (DEPARTMENT OF MECHANICAL ENGINEERING, 2017-12)

  The objectives of the thesis paper are to conduct an investigation into the reaction force generated by the impact of a jet of water onto various target vanes and to compare between experimental and theoretical forces ...
• STUDY OF THE EFFECT OF MOISTURE CONTENT OF BIOMASS FUEL IN THE PERFORMANCE OF DIFFERENT TYPE OF COOKING STOVES 

  Shah, Shahriar; Imtiaz, Nayeem; Islam, Asrar Bin (DEPARTMENT OF MECHANICAL ENGINEERING, 2017-12)

  Current attention to improved cook stoves (ICS) focuses on the “triple benefits” they provide, in improved health and time savings for households, in preservation of forests and associated ecosystem services, and in ...
• Effect of absorber rock on the performance of solar still 

  Islam Sifat, Marina; Ishrak, Farhan; Mohammad Biplob, Iqtear Uddin (DEPARTMENT OF MECHANICAL ENGINEERING, 2017-12)

  Pure and fresh water is being scarce day by day. In spite of being a riverine country the people of Bangladesh are not provided with sufficient amount of pure drinking water. A large number of people including children ...

View more