• FABRICATION OF A LOW TEMPERATURE DIFFERENTIAL STIRLING ENGINE 

  ALAM, MD. KHURSHED; ISLAM, MD. ARAFAT; UDDIN, MD. AHSAN (DEPARTMENT OF MECHANICAL ENGINEERING, 2009-12)

  In recent years, understanding of the stirling engine has enjoyed considerable growth. Research and development on the stirling engine has steady progressed, and many new insights, inventions, and potential applications ...
• PERFORMANCE EVALUATION OF SOLAR FLAT PLATE COLLECTOR 

  Alam, Capt. Alija; Uddin, Minhaz; Haque, Md. Nazmul (DEPARTMENT OF MECHANICAL ENGINEERING, 2017-12)

  The analysis of thermal performance of the flat-plate collector includes parameters such as solar intensity, ambient temperature and configuration of flat-plate collectors etc. In this paper, the effect of the parameter ...
• ENHANCEMENT OF HEAT TRANSFER IN A PIPE FLOW USING A SWIRLING PERFORATED TWISTED TAPE INSERT 

  Noon Oishe, Sadia; Rahman, Md. Mostafizur; Ahmad, Shahrokh; Bin Ehtesham, Md. Sakib (DEPARTMENT OF MECHANICAL ENGINEERING, 2017-12)

  With the advancement of science and technology heat transfer enhancement has become an important term in the field of engineering research since the effectiveness of heat exchangers are increasing through suitable heat ...
• EXPERIMENTAL INVESTIGATION ON COUNTERFLOW INDUCED DRAFT COOLING TOWER AND PERFORMANCE ANALYSIS 

  Akter Joty, Mahmuda; Sharar, Shadman; Hosaain Khan, Md. Solaiman (DEPARTMENT OF MECHANICAL ENGINEERING, 2017-12)

  Cooled water is necessary for air conditioners, manufacturing processes, power generation and many other purposes. Cooling tower is an equipment used to reduce the temperature of water by extracting heat from water and ...
• Design and Fabrication of a Vapor Absorption Refrigeration System for Vehicle Cabin Cooling Utilizing Exhaust heat 

  Islam, Muhammad Momotazul; Bhowmick, Suvro; Ishtiaque, Jabid (DEPARTMENT OF MECHANICAL ENGINEERING, 2017-12)

  Automobile air-conditioning is a necessity of present life. Designing energy efficient and cost effective products are the main challenge in modern world. From that perspective when we look at a vehicle air conditioning ...
• Flat Plate Solar Collectors for water pre-heating using Concentrated Solar Power (CSP) 

  Sarkar, Lt Imran; Shekh, Md. Al Amin; Peris, Leonard Sunny (DEPARTMENT OF MECHANICAL ENGINEERING, 2017-12)

  Conventional energy sources through-out the world are soon going to be exhausted. Millennium Development Goal (MDG) by United Nation (UN) vision and aim now reflects upon numerous attempt and experiment conduction on ...
• Comparative Analysis of Wear Behaviour of Commercial Polymeric Pipe Materials under Different Sliding Environments 

  Labonee, Monzila Farzana; Rahman, Mohammed Sajidur; Fazlullah, Fahim (DEPARTMENT OF MECHANICAL ENGINEERING, 2017-12)

  The current study was conducted to compare the wear behaviour and frictional nature of three commonly used commercial polymers namely, uPVC (Unplasticized polyvinyl chloride), High Density Polyethylene (HDPE) and Acrylic. ...
• DEVELOPMENT AND PERFORMANCE ANALYSIS OF AN AUTOMATIC THROWING ROBOT WITH AN INTEGRATED METHOD FOR DESTINATION DETECTION 

  Hossain, Sanzida; zzaman, Nahidu; Islam Akand, Md. Mazharul (2017-12)

  A robot is a machine that can perform a certain task given to it automatically. It may perform various task as its design. Among all the task a robot can perform throwing is an important one. Our aim was to understand ...
• DESIGN AND CONSTRUCTION OF A MECHANICAL MOTION RECTIFIER (MMR) 

  Islam, Md. Muzahidul; Rahman Khan, Aurko; Alam, Sarwar (DEPARTMENT OF MECHANICAL ENGINEERING, 2017-12)

  The mechanical rectifier is used to convert bidirectional reciprocating motion into unidirectional rotating motion. In this project we have used two input shafts and one output shaft. The rack and pinion mechanism is ...
• Study of an Optimization Design and Analysis for Stair Climbing Lift 

  Omar, Md. Arman; Quadir Ayon, Arif; Hossain Bhuiyan, Md. Ashraf (DEPARTMENT OF MECHANICAL ENGINEERING, 2017-12)

  A stairlift is a mechanical device for lifting man and material up and down on the stairs, who may find difficulty in doing so themselves. A stairlift can be used as Material Handling System. For sufficiently wide stairs, ...
• DESIGN, CONSTRUCTION AND PERFORMANCE STUDY OF AN INDIRECT TYPE SOLAR DRYER FOR FOOD PRESERVATION 

  Rahman, Md. Mashiur; Rahman, Md. Moshiur; Salam, Kazi Afif (DEPARTMENT OF MECHANICAL ENGINEERING, 2017-12)

  Utilizing the most abundant and free of cost energy of the sun to heat up the air and to use that heated air to dry foods is the main goal of this thesis. In order to do this an indirect type forced convection solar dryer ...
• EXPERIMENTAL STUDY ON THE PERFORMANCE OF MECHANICAL INDUCED DRAFT COOLING TOWER USING DIFFERENT QUANTITY OF CIRCULATING FLUIDS 

  Adnan Bin Rahman, Maj. Sayem; Rahman, Md. Monjur; Khadem, Alimul (DEPARTMENT OF MECHANICAL ENGINEERING, 2017-12)

  Cooling towers are evaporative heat transfer devices in which atmospheric air cools warm water with direct contact between the air and the water by evaporating cooling of water. The main objective of this study is to ...
• STUDY OF IMPACT OF JET ON DIFFERENT VANES FOR MEASURING FLOW RATE AND IMPACT FORCE 

  Hossain, Farzad; Morshed Tithi, Afshana; Sultana Setu, Rifat (DEPARTMENT OF MECHANICAL ENGINEERING, 2017-12)

  The objectives of the thesis paper are to conduct an investigation into the reaction force generated by the impact of a jet of water onto various target vanes and to compare between experimental and theoretical forces ...
• STUDY OF THE EFFECT OF MOISTURE CONTENT OF BIOMASS FUEL IN THE PERFORMANCE OF DIFFERENT TYPE OF COOKING STOVES 

  Shah, Shahriar; Imtiaz, Nayeem; Islam, Asrar Bin (DEPARTMENT OF MECHANICAL ENGINEERING, 2017-12)

  Current attention to improved cook stoves (ICS) focuses on the “triple benefits” they provide, in improved health and time savings for households, in preservation of forests and associated ecosystem services, and in ...
• Effect of absorber rock on the performance of solar still 

  Islam Sifat, Marina; Ishrak, Farhan; Mohammad Biplob, Iqtear Uddin (DEPARTMENT OF MECHANICAL ENGINEERING, 2017-12)

  Pure and fresh water is being scarce day by day. In spite of being a riverine country the people of Bangladesh are not provided with sufficient amount of pure drinking water. A large number of people including children ...
• DEVELOPMENT OF A COST EFFECTIVE WATER SUPPLY SYSTEM BY ADOPTING MOTION SENSOR 

  RAHMAN, M RAIAN-UR-; KARIM JIHAN, Md. NAZMUL; PAUL, DIPTA (DEPARTMENT OF MECHANICAL ENGINEERING, 2017-12)

  Nowadays, energy audit is considered as one of the comprehensive methods in checking the energy usage and wastage in mosques. An energy audit is a study of a Plant or facility to determine how and where energy is used ...
• AN ANALYSIS ON EFFICIENCY OF NATURAL DRAFT COOLING TOWER WITH DIFFERENT QUANTITY OF CIRCULATING FLUIDS 

  MOHAMMAD, NOOR; ISLAM, LT. MD. TAUHIDUL; TASBIR, LT. TOHA AL (DEPARTMENT OF MECHANICAL ENGINEERING, 2017-12)

  Cooling towers are evaporative heat transfer devices in which atmospheric air cools warm water with direct contact between the air and the water by evaporating cooling of water. The main objective of this study is to ...
• DESIGN, CONSTRUCTION AND PERFORMANCE EVALUATION OF A STIRLING CYCLE REFRIGERATION SYSTEM 

  Yasir, Md. Atif; Tuz-Jahara, Fatema- (DEPARTMENT OF MECHANICAL ENGINEERING, 2017-12)

  Concerns about the environmental impact of refrigerants used in vapour-compression heat pumps and refrigerators, have prompted the Stirling-Cycle Research Group at the Military Institute of Science and Technology to ...
• CONSTRUCTION OF SAILWING ROTOR (VERTICAL) FOR PUMPING WATER IN BANGLADESH 

  Ashraf, Asif; Autul, Yashdi Saif; Talukder Nazib, Md.Shah Arman Alam (DEPARTMENT OF MECHANICAL ENGINEERING, 2017-12)

  From the Recent years perceptions, obviously Fossil fuels are going to either be gone or they will turn out to be excessively costly, making it impossible to sensibly utilize and furthermore, the atmosphere is changing ...
• Performance Comparison of Fluids in a Closed Loop Pulsating Heat Pipe 

  Yakub, Lt. Md.; Murshed, Fahim; Zahir, Samin Shadman (DEPARTMENT OF MECHANICAL ENGINEERING, 2017-12)

  The pulsating heat pipe is the advent of avid progression for the rise of heat transfer technology, which in a plethora of modern techniques has risen automatically to the forefront of microelectronics cooling. Recent ...

View more