• HYBRID PAPR REDUCTION TECHNIQUES IN OFDM AND MIMO-OFDM SYSTEM FOR DIFFERENT MODULATION SCHEMES 

  NASRIN MUNNI, TASNOVA (DEPARTMENT OF ELECTRICAL, ELECTRONIC AND COMMUNICATION ENGINEERING, 2021-12)

  Orthogonal frequency division multiplexing (OFDM) is the most prominent multicarrier modulation scheme for existing as well as next generation wireless communication system. To meet the growing need for higher data rate ...
• ANALYTICAL EVALUATION OF THE EFFECT OF CROSSPOLARIZATION IN A POLARIZATION DIVERSITY MIMO SATELLITE TO GROUND LINK 

  RIF, SHA (DEPARTMENT OF ELECTRICAL, ELECTRONIC AND COMMUNICATION ENGINEERING, 2021-09)

  Any communication link that uses an artificial satellite in its propagation path is referred to as satellite communication. In today's world, satellite communications are critical. Over 2000 artificial satellites are ...
• OUTAGE CAPACITY ANALYSIS OF MC-CDMA BASED ON COGNITIVE RADIO NETWORK 

  KABIR, MD. ALOMGIR KABIR (DEPARTMENT OF ELECTRICAL, ELECTRONIC AND COMMUNICATION ENGINEERING, 2021-09)

  Cognitive Radio Networks (CRN) are aimed at efficiently utilizing the spectrum to solve the spectrum surge generated by large wireless node deployments. Such networks allow users to operate within the best frequency band ...
• ANALYSIS AND MODELING OF GNSS AUGMENTATION SYSTEM FOR BANGLADESH 

  SADMAN, A. A. M. SHAH (DEPARTMENT OF ELECTRICAL, ELECTRONIC AND COMMUNICATION ENGINEERING, 2021-06)

  Satellite communication, certainly is one of the most reliable means of communication nowadays because of its larger coverage, broader bandwidth and ability to provide an incessant communication. In order to enhance the ...
• A TECHNIQUE FOR OPTIMAL PLACEMENT OF DISTRIBUTED GENERATORS IN POWER SYSTEM NETWORKS 

  HOSSAIN, SHAH MOHAZZEM (DEPARTMENT OF ELECTRICAL, ELECTRONIC AND COMMUNICATION ENGINEERING, 2019-02)

  The modern day societies are becoming more and more dependent on electrical energy. It is the most important part of our day to day life whose demand is increasing continuously. Even with today's advanced power system ...
• PERFORMANCE ANALYSIS OF A mmWAVE-NOMA NETWORK FOR REAL-TIME IoT APPLIC ATIONS 

  TABASSUM, FARIHA (DEPARTMENT OF ELECTRICAL, ELECTRONIC AND COMMUNICATION ENGINEERING, 2020-09)

  The fifth-generation (5G) cellular network is expected to meet the demand for ultra-high data rate, low latency and bulk connectivity due to the massive deployment of internet of things (IoT) sensors and devices. The ...
• ANALYSIS OF TARGET MODELS AND EVALUATION OF DETECTION CAPABILITY FOR DIFFERENT FALSE ALARM RATE IN PRESENCE OF FLUCTUATING TARGETS USING SWERLING MODEL IN RADAR SYSTEM 

  ISLAM, MD. MAYNUL (DEPARTMENT OF ELECTRICAL, ELECTRONIC AND COMMUNICATION ENGINEERING, 2019-01)

  Target Detection is the most important factors in RADAR system and many researches have already done their research to improve the detection capability. This detection can be done for two types of targets, non-fluctuating ...
• DESIGN AND ANALYSIS OF LOW NOISE LOW POWER FREQUENCY SYNTHESIZERS FOR WIRELESS COMMUNICATIONS USING 90 NM CMOS TECHNOLOGY 

  Akhter, Nargis (DEPARTMENT OF ELECTRICAL, ELECTRONIC AND COMMUNICATION ENGINEERING, 2020-12)

  Phase-Locked Loop (PLL) based frequency synthesizer is one of the most crucial components in mobile or wireless communications. It is mainly used for frequency multiplication with the help of a PLL. With the development ...
• ANALYSIS AND DEVELOPMENT OF REVERSIBLE DATA HIDING SCHEME BASED ON PIXEL VALUE ORDERING 

  ABDUL HASIB, SULTAN (DEPARTMENT OF ELECTRICAL, ELECTRONIC AND COMMUNICATION ENGINEERING, 2019-12)

  Reversible Data hiding (RDH) is an evolving forensic and covert-communication technology that embeds data into a cover image (or other media like video or audio) so that the embedded data later can be extracted for the ...
• Bit Error Rate Performance Analysis of an Optical Fiber Communication System with a Multi-Core Fiber 

  Hossain, Md Jahangir (DEPARTMENT OF ELECTRICAL, ELECTRONIC AND COMMUNICATION ENGINEERING, 2016-01)

  Multicore Fiber (MCF) is found to be a promising candidate to replace Single Mode Fiber (SMF) in order to increase the capacity of an optical fiber link. In this thesis, investigations are carried out to find out the ...
• A NEW APPROACH FOR CALCULATING TRANSMISSION RELIABILITY MARGIN 

  Nadia, Awatif (DEPARTMENT OF ELECTRICAL, ELECTRONIC AND COMMUNICATION ENGINEERING, 2020-12)

  The basic function of an electric power system is to satisfy the system load requirements as economically as possible and with a reasonable assurance of continuity and quality. Therefore, it is essential to maintain the ...
• DEVELOPMENT OF ENERGY EFFICIENT HYBRID POWER SYSTEM FOR GREEN CELLULAR BASE STATIONS 

  Hossain, Md. Sanwar (DEPARTMENT OF ELECTRICAL, ELECTRONIC AND COMMUNICATION ENGINEERING, 2021-03)

  A cellular base station (BS) powered by renewable energy sources (RES) is a timely requirement for the growing demand of wireless communication. Designing such a BS in Bangladesh poses some challenges due to the dynamic ...
• DESIGN OF M2M COMMUNICATIONS OVER CELLULAR NETWORKS WITH LOCALIZATION-ASSISTED POWER CONTROL AND COMMUNICATION MODE SELECTION MECHANISM 

  DAS, SREE KRISHNA (DEPARTMENT OF ELECTRICAL, ELECTRONIC AND COMMUNICATION ENGINEERING, 2020-07)

  The location information of an unknown machine (UM) is crucial in machine-to-machine (M2M) communications for several perspectives, such as energy efficiency (EE) and spectrum efficiency (SE). Integration of location ...
• DESIGN AND PERFORMANCE ANALYSIS OF A LOW POWER SMALL AREA RFID TRANSPONDER FOR WIRELESS COMMUNICATION APPLICATIONS 

  Hassan Saika, Tasmia (DEPARTMENT OF ELECTRICAL, ELECTRONIC AND COMMUNICATION ENGINEERING, 2020-07)

  Today RFID technology is mostly used as a medium for numerous tasks including managing supply chains, healthcare, tracking livestock, preventing counterfeiting, controlling building access, and supporting automated checkout. ...
• AUTOMATIC ROI SELECTION FOR MULTI-MODAL MEDICAL IMAGES 

  Mohammad Abid Rahman, Chowdhury (DEPARTMENT OF ELECTRICAL, ELECTRONIC AND COMMUNICATION ENGINEERING, 2020-07)

  The Region of Interests (RoIs) in Medical Images (MIs) contain specialized form of clinical and biological data important for medical procedures and practices. Their detection with higher accuracy and representation with ...
• DESIGN AND IMPLEMENTATION OF AN ARDUINO BASED SIGNALLING SYSTEM FOR PHYSICALLY CHALLENGED PERSONS 

  JAHED JOYANTEE, TASNIA (DEPARTMENT OF ELECTRICAL, ELECTRONIC AND COMMUNICATION ENGINEERING, 2020-09)

  Humanity is the prime concern for the mankind to make a beautiful and peaceful world. Physically challenged children and elderly persons are part of our families and part of this society who need special care for their ...
• SHORT TERM LOAD FORECASTING TECHNIQUE BASED ON INTEGRATION OF CONVOLUTIONAL NEURAL NETWORK AND LONG-SHORT-TERM MEMORY NETWORK 

  HASAN RAFI, SHAFIUL (DEPARTMENT OF ELECTRICAL, ELECTRONIC AND COMMUNICATION ENGINEERING, 2020-08)

  In this thesis work, a new technique is proposed to forecast short term electrical load. Load forecasting is an integral part of power system planning and operation. Precise forecasting of load is essential for unit ...
• Design and Development of an Efficient Charging System for the Battery Operated Vehicles in Bangladesh 

  AWAL, MD REZAUL (DEPARTMENT OF ELECTRICAL, ELECTRONIC AND COMMUNICATION ENGINEERING, 2019-12)

  In this research work, an inclusive study has been carried out on the effect of Battery operated Electric Three Wheelers locally called ‘Easy-bike’ on the Bangladesh national power grid. Easy-bike has become a widely ...
• PERFORMANCE EVALUATION OF A MULTI-HOP WDM NETWORK WITH OXC ARCHITECTURE 

  HAQUE, MUNIRA (DEPARTMENT OF ELECTRICAL, ELECTRONIC AND COMMUNICATION ENGINEERING, 2021-01)

  The combined effect of crosstalk and noise on Bit Error Rate (BER) of a multi-hop Wavelength Division Multiplexing (WDM) transmission system with Limited Wavelength Interchanging Cross Connects (L-WIXC) are investigated ...
• DESIGN AND ANALYSIS OF HYBRID WAVEGUIDES FOR LONG RANGE SURFACE PLASMON PROPAGATION 

  SHAFIUL ALAM, MOHAMMAD (DEPARTMENT OF ELECTRICAL, ELECTRONIC AND COMMUNICATION ENGINEERING, 2020-09)

  Three different models a metal strip, a slot-based waveguide, and a hybrid plasmonic waveguide with a metal cap have been examined. Comparative analysis of some waveguide characteristics such as propagation length, ...

View more