Recently added

MIST Central Library Repository

Department of Mechanical Engineering (ME): Recent submissions

  • EXPERIMENTAL INVESTIGATION ON THE CHARACTERISTICS OF A CLOSED LOOP PULSATING HEAT PIPE (CLPHP) FOR DIFFERENT FLUIDS 
    Paul, Lt Shourav Kumar; Hasan, Tasnimul; Bari, Iffat Ara (DEPARTMENT OF MECHANICAL ENGINEERING MILITARY INSTITUTE OF SCIENCE AND TECHNOLOGY MIRPUR CANTONMENT, DHAKA - 1216, BANGLADESH, 2017-12)
    Thermal control is an important topic for thermal management of small electrical and electronic devices. Closed loop pulsating heat pipe (CLPHP) is emerging as the best solution for thermal control. The aim of this ...
  • NUMERICAL STUDY OF CONVECTIVE HEAT TRANSFER FOR A TURBULENT FLOW IN A CORRUGATED TUBE USING NANO FLUID 
    RAHMAN, MD. MAHBUBUR (DEPARTMENT OF MECHANICAL ENGINEERING MILITARY INSTITUTE OF SCIENCE AND TECHNOLOGY MIRPUR CANTONMENT, DHAKA - 1216, BANGLADESH, 2018-12)
    Heat transfer enhancement can be done in different ways, but the use of nanofluid is one of the latest approaches. A numerical investigation of turbulent forced convection through a right-angled triangular-shaped corrugated ...
  • STUDY OF THE INFLUENCE OF LEADING EDGE ROTATING CYLINDER ON THE PERFORMANCE OF A SYMMETRIC AEROFOIL 
    FAISAL, KH. MD. (DEPARTMENT OF MECHANICAL ENGINEERING MILITARY INSTITUTE OF SCIENCE AND TECHNOLOGY (MIST), 2017-02)
    This research dealt with moving surface boundary layer control, applied to NACA 0018 aerofoil both by simulation and experiment. The moving surface was provided by a rotating cylinder placed at the leading edge of the ...
  • STRUCTURAL DESIGN, ANALYSIS AND FLIGHT TEST OF AN UNMANNED AERIAL VEHICLE (UAV) HAVING AEROFOIL SHAPED FUSELAGE 
    Rahman, Irfanur; Asaduzzaman, K. M.; Arman, Arif (Department of Mechanical Engineering (ME) Military Institute of Science and Technology (MIST), 2014-12)
    The principal objective of this project is to design and manufacture an UAV having an aerofoil shaped fuselage. The project includes potential study of the advantages of aerofoil shaped fuselage and aerofoil shaped horizontal ...
  • DESIGN AND PERFORMANCE ANALYSIS OF A MICROCONTROLLER BASED NATURAL AIR COOLING SYSTEM FOR STANDBY LOAD 
    Sady, LT Saeed; Murshed, Rubaiya; Hasan, MD. Jahid; Barua, Jibak (DEPARTMENT OF MECHANICAL ENGINEERING MILITARY INSTITUTE OF SCIENCE & TECHNOLOGY (MIST) MIRPUR CANTONMENT, MIRPUR-12, DHAKA, 2014-12)
    People of our country are not so rich that they can afford to buy air conditioner for their comfort. Moreover our atmospheric condition is not good at all. Average temperature is varying 31-33˚C. During summer it is gone ...
  • DESIGN, OPTIMIZATION AND PERFORMANCE EVALUATION OF A SOLAR HEAT COLLECTOR TROUGH AUTOMATED DATA ACQUIZITION SYSTEM 
    Ibne Shahid, Nashid; Mobashwer Indaleeb, Mustahseen; Akramul Haque, Dewan (Department of Mechanical Engineering, Military Institute of Science and Technology (MIST), 2012-12)
    From the very beginning of the 21st century, the world is craving towards technological advancement. Every continent, every country is fighting for their survival through technology to make their future predictable and ...
  • INVESTIGATION OF DRAG ANALYSIS OF FOUR DIFFERENT PROFILES TESTED AT SUBSONIC WIND TUNNEL 
    SHEHAB BIN SAYEED, CAPTAIN; MORSHED, MUNZARIN; SYED ABDULLAH AL MAMUN, FLYING OFFICER (Department of Mechanical Engineering, Military Institute of Science and Technology (MIST), 2013-12)
    The amount of drag produced significantly depends on shape. This investigation deals with the drag analysis of four different profiles, which are cylinder, sphere, symmetrical aerofoil (NACA 0015) and cambered aerofoil ...
  • DESIGN AND FABRICATION OF REMOTE CONTROLLED ROBOTIC ARM FOR SHIPMENT OF CHEMICALLY HAZARDOUS WASTE MATERIALS IN FACTORY 
    Ahmed Antu, Imran; Rahman Turza, Nahidur; Emran Hossain, Kazi Md. (Department of Mechanical Engineering, Military Institute of Science & Technology (MIST), 2013-12)
    Every year many workers are injured, become ill or are killed because of exposure to harmful chemical substances. These incidents cause human suffering, loss of production and high medical cost. This robotic arm aims to ...
  • Development of an Integrated Control System for a Humanoid Robot 
    Zaman, Rahid-uz-; Rahman, Miftahur; Bhuiyan, Yeasin Arafat (Department of Mechanical Engineering Military Institute of Science and Technology (MIST) Mirpur Cantonment, Dhaka, Bangladesh., 2013-12)
    Humanoid robot is a huge field for modern robotics research. Many renowned organizations and intellectuals are still working on it. Some outcome of their long term research are ASIMO by Honda, NAO by Aldebaran, HUBO by ...
  • Prospect of tidal energy in Bangladesh 
    Rahman, Md. Mahbubur; Hasan Walid, Md. Minul; Hasan, S.M. Mahmudul; Islam, Md. Ariful (Department of Mechanical Engineering, Military Institute of Science & Technology, 2013-12)
    Tidal energy is one of the cheapest energy that we find naturally like wind energy & solar energy. The source of this energy is water tide. Tidal energy conversion techniques exploit the natural rise and fall of the level ...
  • Design and Fabrication of Humanoid Robot to Attain Human-Like Movements 
    Rahman Mizan, Md. Mizanur; Masud Saquib, Raihan; Abdullah, Fardan (Department of Mechanical Engineering, Military Institute of Science and Technology (MIST), 2013-12)
    This thesis paper analyze the flexibility of humanoid robot structure design based on design parameters of degree of freedoms and joint angle range characteristic. As a result it helps to identify elements that provide ...
  • Design and Fabrication of Humanoid Robot to Attain Human-Like Movements 
    Rahman Mizan, Md. Mizanur; Masud Saquib, Raihan; Abdullah, Fardan (Department of Mechanical Engineering Military Institute of Science and Technology (MIST), 2013-12)
    This thesis paper analyze the flexibility of humanoid robot structure design based on design parameters of degree of freedoms and joint angle range characteristic. As a result it helps to identify elements that provide ...
  • HEAT TRANSFER ENHANCEMENT IN A PIPE FLOW USING A ROTATING TWISTED TAPE INSERT 
    Adam, Capt Md. Shah Abubin; Zunayed Mahmud, Lt; Salsabil Amin Nizhum, Lt; Amin, Al; Nafis Bin Islam, Md. (DEPARTMENT OF MECHANICAL ENGINEERING, MILITARY INSTITUTE OF SCIENCE & TECHNOLOGY (MIST), 2013-12)
  • Orchestrating of Stream Programs by Genetic Algorithm 
    Ahmed Khan, S. M. Shameem; Arif Hasan, Md.; Shayed Hasan, Md. (Department of Computer Science and Engineering, Military Institute of Science and Technology, 2013-12)
    Streamprogrammingonparallelhardwarehasbecomeubiquitous. Inthismodel,aprogram is executed on stream graph which consists of a set of actors performing different functions communicating through edges. It is difficult to ...
  • DESIGN AND CONSTRUCTION OF BERNOULLIS APPARATUS 
    ENAMUL HASAN KAMAL, SYED; NAJMUS SAKIB, MD.; REZANUR ISLAM, SK. (DEPARTMENT OF MECHANICAL ENGINEERING, MILITARY INSTITUTE OF SCIENCE &TECHNOLOGY, 2012-12)
    Bernoulli’s apparatus is one of the simple but fundamental experimental devices of fluid mechanics. With this set up anyone could be able to verify physically verify the Bernoulli’s equation which is the foundation of ...
  • STRAIN RATE EFFECT ON TENSILE PROPERTIES OF NYLON 6,6 PLASTIC 
    Alam, Md. Akterul; Rafat, Mehedi Alam; Haque, Sanjana (2015-06-24)
  • RAINWATER HARVESTING AND UTILIZATION 
    Hannan, Md. Arif; Ahmed, Ashek; Islam, Md. Saiful; Khan, Md. Hafizur Rahman (2015-06-24)
    Water is a vital element in human life. Requirement of pure and clean fresh water is undeniable in daily life. All over the world this water is extracted from underground and surface sources. Continuous extraction of ...
  • DETERMINATION OF CO-EFFICIENT OF PERFORMANCE (COP) OF A VAPOR COMPRESSION REFRIGERATION CYCLE USING DIFFERENT REFRIGERENTS 
    Hossain, SM Sabahat; Tanjirul Islam, Md.; Mahmud, Md. Abir (2015-06-24)
    Vapor compression refrigeration system was studied as it is the most widely used refrigeration system especially in small scale of refrigeration application such as in domestic application. Performance of the system becomes ...
  • DESIGN, FABRICATION & PERFORMANCE ANALYSIS OF A PARABOLIC SOLAR CONCENTRATOR MADE OF MIRROR 
    ARA, ISMAT; KHANOM, TAHMINA; FATIMA, TASNIA (2015-06-24)
    Parabolic solar concentrators are a low cost implementation of concentrated solar power technology that uses parabolic trough shaped mirrors to concentrate the incident direct normal irradiation onto a receiver tube which ...
  • A COMPREHENSIVE DESIGN AND CONSTRUCTION OF COCONUT OIL EXTRACTION MACHINE AND ANALYSIS OF COCONUT OIL 
    Hasan Kawser, Mahmudul; Kabir, Humayun; Premadasa, Flt. Lt. GDP; Nayeem, Nazratun (2015-06-23)
    Coconut oil is very familiar and useful for human civilization. Now-a-days many coconut oil extraction procedures are used. All these process are adapted in large industries. In this project the main concern was to produce ...

Search DSpace


Advanced Search

Browse

My Account