• The Influence of Silt Layer Orientation on Slope Stability in Shale Formations 

  Alam, AKM Badrul; Fujii, Yoshiaki; Li, Zhixue; Hasan Dipu, Nahid; Tajib–Ul–Islam, Md.; Ahmed Razo, Shakil (Research and Development Wing, MIST, 2025-06)

  Shale rock masses often include silt layers, impacting slope stability in construction and mining. Analyzing their interaction is crucial for long-term stability. This study used an elasto-plastic model, incorporating the ...
• Aerodynamic Characteristics and Flow Patterns of Square Cylinders with Rounded Facets 

  Biswas, Nripendranath (Research and Development Wing, MIST, 2025-06)

  This study experimentally investigates the effect of facet widthon the static pressure distribution around a single square cylinder with rounded facets. Experiments are conducted in an open-circuit wind tunnel ...
• Correlation Analysis of Rate of TEC Index and Spread F over North American Ionosondes 

  Rafi, Mehdi Hasan; Mostafa, Md Golam (Research and Development Wing, MIST, 2025-06)

  This study investigates the diurnal, seasonal, and latitudinal variations of Spread F and theRate of TEC Index (ROTI) over North America during the high solar activity period of 2014. Using GNSS-based ROTI ...
• System Usability and Design Evaluation of AI Chatbots: A Comparative Analysis of ChatGPT, Google Bard, and Bing Chat 

  Mustafina, Sumaiya Nuha; Khan, Nusrat Kaniz; Islam, Muhammad Nazrul; Siddiqua Nusrat, Fatema; Akhtaruzzaman, M. (Research and Development Wing, MIST, 2025-06)

  Artificial intelligence (AI) has brought significant advancements in technology while the chatbots like ChatGPT, Google Bard, and Bing Chat are some of its remarkable innovations. These chatbots are helping users ...
• Predicting Economic Resilience in Nigeria Using Machine Learning: A Framework for Policy Intervention 

  Omololu, Akinrotimi Akinyemi; Ajibade, Oyekunle Rafiat; Abolore, Mabayoje Modinat (Research and Development Wing, MIST, 2025-06)

  Economic resilience is important in sustaining the state of the Nigerian economy from different distortions. Therefore, the current study implemented a machine learning method for estimating and ...
• Structural and Thermal Analysis of Fuel Rod of VVER-1200 Nuclear Reactor Using ANSYS Software 

  Nusrat Jahan Shanta, Shah; Mollah, Abdus Sattar (Research and Development Wing, MIST, 2025-06)

  This study focuses on analyzing the thermo-mechanical behavior of fuel rods in VVER-1200 nuclear reactors to ensure their safe and efficient operation. Bangladesh plans to operate two VVER-1200 reactors ...
• A Preliminary Assessment of Power Savings by Flettner Rotors Installed on a Cargo Ship 

  Hasan Moon, Mahin; Ariyan Zaman, Sikder; Hussain, Md. Daluar; Uddin, Md. Mezbah (Research and Development Wing, MIST, 2025-06)

  In response to increasingly stringent environmental regulations by the International Maritime Organization (IMO), this study presents a preliminary assessment of Flettner rotors as a viable wind-assisted propulsion ...
• The Impact of Modern Research and Innovation on Society and Individuals 

  Rahman, Fazlar; Rabbi, Fazle; Bhuiyan, Md. Shahnewaz; Harun-or-Rashid, Mohammad (Research and Development Wing, MIST, 2025-06)

  Life quality and socio-economic conditions have improved dramatically over the last century due to the rapid advancement and innovation of modern technologies, which have evolved from the fruitful research of scientists. ...
• Investigation of the Mechanical Properties of Repurposed-Net-Bag Reinforced Plastic 

  A. Saqafi, Ahmed; Sadia, Afnan; R. Tarek, Al-Amin; A. Alim, Ahad; Y. Tuly, Farzana; Rahman, Md. A. (Research and Development Wing, MIST, 2025-06)

  This study investigates the potential of recycling grocery net bags for reinforcing epoxy matrix composites, leveraging their favorable strength-to-weight ratio and offering a costreduction and ...
• A Review on Assessment and Management of Occupational and Health Risks in the Shipbuilding Sector of Bangladesh 

  Islam, A H M Rafiqul; Tasnim Sarah, Umme; Zakaria, N. M. Golam; Begum, Shahida (Research and Development Wing, MIST, 2025-06)

  Bangladesh’s shipbuilding sector makesa significant contributionto the country’s economy. However, it is also associated with occupational risks for its workforce. This paper aims to review and explore ...
• Newsletter 2024 (Oct-Dec) 

  Unknown author (Research and Development Wing, MIST, 2024-12)
• Antibacterial/Antiviral Face Masks: Processing,Characteristics, Challenges, and Sustainability 

  Hoque, Md Enamul; Sarker, Mirajul Alam; Arif, Kiswa; Ali, M. Azam; El-Bialy, Tarek (Research and Development Wing, MIST, 2023-12)

  The facemask has become a part of our daily life after the emergence of SAR-CoV-2, commonly known as the novel coronavirus 2019 or, COVID-19 all over the world. On a day-to-day basis, previously ...
• Terracotta in Architecture: Overview on Historical and Contemporary Practice in Bangladesh 

  Abu Salaque, Syed (Research and Development Wing, MIST, 2023-12)

  Although Terracotta is one of the oldest in almost all sub-continents and was spread out across the whole world now-a-days it has been a common, traditional, and indigenous object in ...
• Development of Space-Borne Antenna Reflector via 3D Printing 

  Kori, Jaya; Patnaik, Sampurna; Chattopadhyaya, Somnath; Chatternjee, Sayan (Research and Development Wing, MIST, 2023-12)

  The growing necessity of large aperture-based structures for many aerospace applications emphasizes the need to deploy large antenna structures in space. The space antennas should be light in ...
• Physical, Mechanical, and Durability Properties of Concrete with Class F Fly Ash 

  Islam, Md Jahidul; Ahmed, Tasnia; Salehin, Md Riadus; Sadman Sakib, Mohammad; Shariar, Md Shakil; Hossain, Monowar (Research and Development Wing, MIST, 2023-12)

  Concrete is one of the most used manufactured materialsin the world. Fly ash (FA) is a byproduct produced from pulverized coal combustion in power generation. A total of 0.08 million tons ...
• Deposition of Steel over Steel by Friction Surfacing Technique and Investigation of its Physical Geometry 

  Jangid, Hemlata; Singh, Nirmal K.; Chattopadhyaya, Somnath; Krishna Sai, M. Mohan; Parmar, Gaurav (Research and Development Wing, MIST, 2023-12)

  Friction surfacing (FS) is a coating technique inspired by friction stir welding. FS is a solid-state, thermo-mechanical process providing excellent wear and corrosion resistance properties. Frictional ...
• Intelligent Head-bot, towards the Development of an AI Based Cognitive Platform 

  Baki, Ramisha Fariha; Akhtaruzzaman, M.; Refat, Tahsin Ahmed; Rahman, Mouneeta; Razzak, Md Abdur; Majumder, Md Mahfuzul Karim; Islam, Md Adnanul; Ferdaus, Md Meftahul; Rahman, Muhammad Towfiqur; Naveed, Quadri Noorulhasan (Research and Development Wing, MIST, 2023-12)

  A cognitive humanoid head is an AI enabledhead-bot platformthat resembleshuman's cognitive abilities, such as perception, thinking, learning, and decision-making. The platformis able tointeract with human ...
• MIST Prospectus 2015 

  Unknown author (Research and Development Wing, MIST, 2015-12)
• MIST Prospectus 2014 

  Unknown author (Research and Development Wing, MIST, 2014-12)
• MIST Prospectus 2013 

  Unknown author (Research and Development Wing, MIST, 2013-12)

View more