• Bank-Line Behaviour of the Main Rivers Located Within Sundarbans Using Digital Shoreline Analysis System 

  Anam, Md. Manjurul; Jabir, Abdullah-Al-; Hasan, G. M. Jahid (R&D Wing, MIST, 2021-06)

  Sundarbans, the largest mangrove forest located over the GBM basin, has impacted lives of millions over the years. Standing against various natural disasters, rivers of Sundarbans have undergone major issues such as ...
• Effect of Admixture on Physical and Mechanical Properties of Recycled Brick Aggregate Concrete 

  Islam, Md. Jahidul; Shahjalal, Md.; Hasan, Md. Mehedi; Chowdhury, Zarin Tasnim (R&D Wing, MIST, 2021-06)

  With the increasing population of the world, the rate of development of infrastructure is increasing day by day; which has placed a massive demand for natural aggregates. Besides, huge amount of demolished construction ...
• Assessment of Ecosystem Services and Disservices in Urban Environment Using Multispectral Image Analysis and Geospatial Mapping 

  Haque, Md. Nazmul; Alam, Irtija; Rahman, Atif Aninda (R&D Wing, MIST, 2021-06)

  Ecosystem service and disservice components have a great impact on the environment as well as on urban life. The aim of the research is to assess the impact of ecosystem services and disservices by tracking the change ...
• Geographical Information System Approach to Delineate the Watershed’s Morphometric Parameters for Sustainable Hydrological Modeling of Barind Region, Bangladesh 

  Rahman, Md. Ashikur; Sazzad, M. H.; Rupom, R. S. (R&D Wing, MIST, 2021-06)

  Water is an important resource of the earth’s surface and it is integral for all on this planet. The availability or the scarcity of water depends on the watershed characterizes that consider the basic, linear, and shape ...
• Comparing the Potentiality of Propane, Propanol and Octane Fuel Using in SI Engine Based on Energy-Exergy Analysis 

  Mizan, Md Mizanuzzaman (R&D Wing, MIST, 2021-06)

  From the beginning of IC engine era, it is trying to improve the performance and efficiency of internal combustion engine. In this study, numerically analysis on combustion of Propane, Propanol and Octane in SI engine ...
• Experimental Study of Water Collection from Plume of an Induced-Draft Counter-Flow Cooling Tower Using Space Charge Injection 

  Patwary, Md. Fahim Faisal; Agarwala, Isheka; Ahmed, Rashik; Das, Dipak Kanti (R&D Wing, MIST, 2021-06)

  Plume collection from cooling towers can be a reliable solution to the water scarcity problem faced in many regions around the world. Meshes are one of the most proposed collectors in this regard that rely upon inertial ...
• Modeling and Control Simulation of a Robotic Chair-Arm: Protection against COVID-19 in Rehabilitation Exercise 

  Akhtaruzzaman, M.; Shafie, Amir A.; Khan, Md Raisuddin; Rahman, Md Mozasser (R&D Wing, MIST, 2020-12-16)

  In the field of rehabilitation, lower-limbs therapeutic exercise has become a challenging job for medical professionals in COVID-19 pandemic. Providing manual therapy to lower limbs is not an easy task and, in most cases, ...
• Tensile Strength Study of Stainless-Steel using Weibull Distribution 

  Bhuiyan, Md Shahnewaz; Anzum, Tanzida; Hasan, Forhad-Ul-; Rahman, M. Azizur (R&D Wing, MIST, 2020-12-16)

  In the present study, the distribution pattern of the ultimate tensile strength of 304-grade stainless steel was investigated using a two-parameter Weibull distribution function. During tensile testing, it was observed ...
• Corrosion Behavior of Copper Based Heat Exchanger Tube in Waters of Bangladesh Region at Varied Temperature and Flow Velocity 

  Rahman, M. Muzibur; Ahmed, S. Reaz (R&D Wing, MIST, 2020-12-16)

  Heat exchangers used in the ships are mostly of water-cooled shell and tube type, whose tube stacks are made of copper-based materials due to the requirement of high corrosion resistance and high thermal conductivity. ...
• Experimental Analysis on Safety System of a Simulated Small Scale Pressurized Water Reactor System with Intelligent Control 

  Islam, Md. Shakerul; Hossain, Altab; Mursed, Khalid; Chowdhury, Rafi Alam (R&D Wing, MIST, 2020-12-16)

  Reactors are widely used in the nuclear power plant due to the rapid demand for electricity by reducing the greenhouse effect. However, the effectiveness of the nuclear reactor depends on an adequate safety system. Hence, ...
• Mathematical Modelling of Vehicle Drifting 

  Jazar, Reza N.; Alam, Firoz; Milani, Sina; Marzbani, Hormoz; Chowdhury, Harun (R&D Wing, MIST, 2020-12-16)

  A mathematical model and condition for drifting of vehicles are presented in this paper. Employing the condition for possible steady-state drifting, the mathematical model of a vehicle with lateral weight lift during ...
• Exploring and Comparing the Performance of Design Methods Used for Information Intensive Websites 

  Zaki, Tarannum; Sultana, Zinia; Rahman, S M Anisur; Islam, Muhammad Nazrul (R&D Wing, MIST, 2020-06)

  At present, web applications are one of the most widely used software applications in different organizations. A website is a virtual representation of the structure of any organization. Good ...
• Land-Use and Land-Cover Change in Dhaka Eastern Region and Its Impact on Surface Run-off 

  Huq, Md. Habibul; Rahman, Md. Mafizur (R&D Wing, MIST, 2020-06)

  The aim of this study is to identifythe impending urbanization-led land-use and land-cover (LULC) change of Dhaka Eastern Region (DER) and assessing its impact on surface runoff. Remotely sensed image ...
• Link Budget Analysis in Designing a Web-application Tool for Military X-Band Satellite Communication 

  Akhtaruzzaman, M.; Sadakatul Bari, S. M.; Hossain, Syed Akhter; Rahman, Md. Mahbubur (R&D Wing, MIST, 2020-06)

  In satellite communication, Link Budget analysis is the most important part todeterminegainsand lossesof signalsfrom the transmitter to the receiver. Most importantly, it investigates system performance and ...
• Assessment of Hexavalent Chromium Pollution in Buriganga and Dhaleshwari River Waterbodies Adjacent toTannery Estates in Bangladesh 

  Rahman, Hafizur; Hoque, Nabila; Sarker, Palash K.; Safa, Ashrafus (R&D Wing, MIST, 2020-06)

  Recently, in Bangladesh, all tannery industries have beenrelocated to a new location exclusively established for leather processing industries with modern manufacturing facilities and effluent treatment ...
• Comparative Study of Physical and Mechanical Properties of Machine and Manually Crushed Brick Aggregate Concrete 

  Islam, Md J.; Rahman, Jesika; Nawshin, Sadia; Islam, Mohammad M. (R&D Wing, MIST, 2020-06)

  With technological advancement on the rise, manual crushing of bricks is gradually being replaced by machine crushing to obtain coarse aggregates for construction. However, properties of the brick aggregates obtained ...
• GREEN INFORMATION AND COMMUNICATION TECHNOLOGY (ICT) : A WAY TO ACHIEVE ENVIRONMENTAL SUSTAINABILITY 

  Afzal Hossain, Gp Capt Md BAF (R&D Wing, MIST, 2012-05)

  This paper discusses ideas and concepts of information and communications technologies (ICT) in ecological sustainability. It provides a preliminary idea about Green IT. The paper endeavors to create awareness among the ...
• EXPERIMENTAL INVESTIGATION OF PREFABRICATED VERTICAL JUTE DRAIN IN SOFT SOIL 

  Wahidul Islam, Lieutenant Colonel Md; A.J. Khan, Dr. Prof. (R&D Wing, MIST, 2012-05)

  In this study, investigations were undertaken to analyze the feasibility of using prefabricated vertical drain (PVD) made of natural fibre like jute in accelerating the consolidation process of soft soil under surcharge. ...
• EFFECT OF BORE STROKE RATIOS ON OVERALL FRICTION MODEL OF SI ENGINE 

  Mizanuzzaman, Major Md. (R&D Wing, MIST, 2012-05)

  Bore Stroke ratios are considered one of the most significant impact on friction of SI engine. This paper outlines a method or model which provides the engine designer with an estimation of overall friction mean effective ...
• JET NOISE MENACE: A REVIEW 

  Abdus Salam (BAF), Gp Capt; Nc Chattopadhyay (IAF), Gp.Capt.; Rumi, Jalal Uddin; Eunus, H.E.M.Zahidul Islam (R&D Wing, MIST, 2012-05)

  Aircraft engine jet noise has been a problem since the beginnings of aviation with the introduction of jet-powered aircraft. The demand of aircraft for transport and combat purpose has largely increased in present times. ...

View more