Browsing Bachelor's Thesis by Title

MIST Central Library Repository

Browsing Bachelor's Thesis by Title

Sort by: Order: Results:

  • ENHANCEMENT OF HEAT TRANSFER IN A PIPE FLOW USING A SWIRLING PERFORATED TWISTED TAPE INSERT 
    Noon Oishe, Sadia; Rahman, Md. Mostafizur; Ahmad, Shahrokh; Bin Ehtesham, Md. Sakib (DEPARTMENT OF MECHANICAL ENGINEERING, 2017-12)
    With the advancement of science and technology heat transfer enhancement has become an important term in the field of engineering research since the effectiveness of heat exchangers are increasing through suitable heat ...
  • EXPERIMENTAL INVESTIGATION ON COUNTERFLOW INDUCED DRAFT COOLING TOWER AND PERFORMANCE ANALYSIS 
    Akter Joty, Mahmuda; Sharar, Shadman; Hosaain Khan, Md. Solaiman (DEPARTMENT OF MECHANICAL ENGINEERING, 2017-12)
    Cooled water is necessary for air conditioners, manufacturing processes, power generation and many other purposes. Cooling tower is an equipment used to reduce the temperature of water by extracting heat from water and ...
  • Experimental Investigation on Droplet Evaporation and Leidenfrost Phenomenon 
    Barsha, Tanzima Mahbub; Alam, Shihab Irfan; Ahmed Suma, Fahmida (DEPARTMENT OF MECHANICAL ENGINEERING, 2017-12)
    This experiment presents a detailed and thorough parametric study of the Leidenfrost point which serves as the boundary of the transition and film boiling regimes. The evaporation time in film boiling region of a sessile ...
  • EXPERIMENTAL INVESTIGATION ON THE CHARACTERISTICS OF A CLOSED LOOP PULSATING HEAT PIPE (CLPHP) FOR DIFFERENT FLUIDS 
    Paul, Lt Shourav Kumar; Hasan, Tasnimul; Bari, Iffat Ara (DEPARTMENT OF MECHANICAL ENGINEERING MILITARY INSTITUTE OF SCIENCE AND TECHNOLOGY MIRPUR CANTONMENT, DHAKA - 1216, BANGLADESH, 2017-12)
    Thermal control is an important topic for thermal management of small electrical and electronic devices. Closed loop pulsating heat pipe (CLPHP) is emerging as the best solution for thermal control. The aim of this ...
  • EXPERIMENTAL STUDY ON THE PERFORMANCE OF MECHANICAL INDUCED DRAFT COOLING TOWER USING DIFFERENT QUANTITY OF CIRCULATING FLUIDS 
    Adnan Bin Rahman, Maj. Sayem; Rahman, Md. Monjur; Khadem, Alimul (DEPARTMENT OF MECHANICAL ENGINEERING, 2017-12)
    Cooling towers are evaporative heat transfer devices in which atmospheric air cools warm water with direct contact between the air and the water by evaporating cooling of water. The main objective of this study is to ...
  • FABRICATION AND PERFORMANCE OF A LOW COST RF CONTROLLED ROBOTIC ARM FOR INDUSTRIAL APPLICATION 
    Ul Alam Radient, Mushfik; Saha, Sanad Ranjan; Islam Patwar, Md Kamrul (2015-06-23)
  • FABRICATION OF A LOW TEMPERATURE DIFFERENTIAL STIRLING ENGINE 
    ALAM, MD. KHURSHED; ISLAM, MD. ARAFAT; UDDIN, MD. AHSAN (DEPARTMENT OF MECHANICAL ENGINEERING, 2009-12)
    In recent years, understanding of the stirling engine has enjoyed considerable growth. Research and development on the stirling engine has steady progressed, and many new insights, inventions, and potential applications ...
  • Flat Plate Solar Collectors for water pre-heating using Concentrated Solar Power (CSP) 
    Sarkar, Lt Imran; Shekh, Md. Al Amin; Peris, Leonard Sunny (DEPARTMENT OF MECHANICAL ENGINEERING, 2017-12)
    Conventional energy sources through-out the world are soon going to be exhausted. Millennium Development Goal (MDG) by United Nation (UN) vision and aim now reflects upon numerous attempt and experiment conduction on ...
  • FULL DUPLEX UPLINK COMMUNICATION EXPLOITING DISTRIBUTED ANTENNA SYSTEM FOR 5TH GENERATION CELLULAR NETWORK 
    Mimi, Rubaiyat Sharmin; Rabeya, Syeda; Chowdhury, Ruhin (Dept. of Electrical and Electronic Engineering, 2017)
    Rapid growth of consumer demand for worldwide wireless communication has motivated the development of fifth generation mobile communication system which is 5G. It has encouraged higher frequency range with better service ...
  • HEAT TRANSFER ENHANCEMENT IN A PIPE FLOW USING A ROTATING TWISTED TAPE INSERT 
    Adam, Capt Md. Shah Abubin; Zunayed Mahmud, Lt; Salsabil Amin Nizhum, Lt; Amin, Al; Nafis Bin Islam, Md. (DEPARTMENT OF MECHANICAL ENGINEERING, MILITARY INSTITUTE OF SCIENCE & TECHNOLOGY (MIST), 2013-12)
  • INVESTIGATION OF DRAG ANALYSIS OF FOUR DIFFERENT PROFILES TESTED AT SUBSONIC WIND TUNNEL 
    SHEHAB BIN SAYEED, CAPTAIN; MORSHED, MUNZARIN; SYED ABDULLAH AL MAMUN, FLYING OFFICER (Department of Mechanical Engineering, Military Institute of Science and Technology (MIST), 2013-12)
    The amount of drag produced significantly depends on shape. This investigation deals with the drag analysis of four different profiles, which are cylinder, sphere, symmetrical aerofoil (NACA 0015) and cambered aerofoil ...
  • Modeling and fabrication of solar updraft tower and estimation of power generation with respect to Bangladesh 
    Ayub, Fayrouz; Khan, Arafat Sultan; Akhand, Saarah (DEPARTMENT OF MECHANICAL ENGINEERING, 2017-01)
    In our studies we focused on area of sourcing, converting and delivering sustainable energy. Concentrating at the potential role of solar power. Power generation through a solar updraft tower (SUT) has been a promising ...
  • Orchestrating of Stream Programs by Genetic Algorithm 
    Ahmed Khan, S. M. Shameem; Arif Hasan, Md.; Shayed Hasan, Md. (Department of Computer Science and Engineering, Military Institute of Science and Technology, 2013-12)
    Streamprogrammingonparallelhardwarehasbecomeubiquitous. Inthismodel,aprogram is executed on stream graph which consists of a set of actors performing different functions communicating through edges. It is difficult to ...
  • Performance Comparison of Fluids in a Closed Loop Pulsating Heat Pipe 
    Yakub, Lt. Md.; Murshed, Fahim; Zahir, Samin Shadman (DEPARTMENT OF MECHANICAL ENGINEERING, 2017-12)
    The pulsating heat pipe is the advent of avid progression for the rise of heat transfer technology, which in a plethora of modern techniques has risen automatically to the forefront of microelectronics cooling. Recent ...
  • PERFORMANCE EVALUATION AND NUMERICAL SIMULATION OF AN IC ENGINE FOR DIFFERENT BIODIESEL BLENDS 
    MAMUN, MALIHA; RAHMAN, FARIHA BINTHE; NAZNIN, SADIA (DEPARTMENT OF MECHANICAL ENGINEERING, 2017-01)
  • PERFORMANCE EVALUATION OF SOLAR FLAT PLATE COLLECTOR 
    Alam, Capt. Alija; Uddin, Minhaz; Haque, Md. Nazmul (DEPARTMENT OF MECHANICAL ENGINEERING, 2017-12)
    The analysis of thermal performance of the flat-plate collector includes parameters such as solar intensity, ambient temperature and configuration of flat-plate collectors etc. In this paper, the effect of the parameter ...
  • PERFORMANCE STUDY OF PV PANEL WITH WATER COOLING 
    Bhuyan, Ayesha; Mumu, Tazeen Afrin; Smrity, Araf Mim Ahmed (DEPARTMENT OF MECHANICAL ENGINEERING, MILITARY INSTITUTE OF SCIENCE AND TECHNOLOGY MIRPUR CANTONMENT, DHAKA - 1216, BANGLADESH, 2017-12)
    In photovoltaic system energy conversion efficiency is low. Furthermore, during the long operational period of solar cells, their energy conversion efficiency decreases even more due to increase in operating cell temperature ...
  • PRESERVATION OF MEDICINES & VACCINES BY THERMOELECTRIC (PELTIER) REFRIGERATION UNIT IN BANGLADESH PERSPECTIVE 
    Islam, Md. Shariful; Alam, Afifa; Kamal, S.M. Mahmud (Department of Mechanical Engineering, 2017-01)
    The increase in demand for refrigeration globally in the field of air-conditioning, food preservation, medical services, vaccine storages, and for electronic components temperature control, led to the production of more ...
  • Prospect of tidal energy in Bangladesh 
    Rahman, Md. Mahbubur; Hasan Walid, Md. Minul; Hasan, S.M. Mahmudul; Islam, Md. Ariful (Department of Mechanical Engineering, Military Institute of Science & Technology, 2013-12)
    Tidal energy is one of the cheapest energy that we find naturally like wind energy & solar energy. The source of this energy is water tide. Tidal energy conversion techniques exploit the natural rise and fall of the level ...
  • RAINWATER HARVESTING AND UTILIZATION 
    Hannan, Md. Arif; Ahmed, Ashek; Islam, Md. Saiful; Khan, Md. Hafizur Rahman (2015-06-24)
    Water is a vital element in human life. Requirement of pure and clean fresh water is undeniable in daily life. All over the world this water is extracted from underground and surface sources. Continuous extraction of ...

Search DSpace


Advanced Search

Browse

My Account