Recently added

MIST Central Library Repository

Bachelor's Thesis: Recent submissions

  • Experimental Investigation on Droplet Evaporation and Leidenfrost Phenomenon 
    Barsha, Tanzima Mahbub; Alam, Shihab Irfan; Ahmed Suma, Fahmida (DEPARTMENT OF MECHANICAL ENGINEERING, 2017-12)
    This experiment presents a detailed and thorough parametric study of the Leidenfrost point which serves as the boundary of the transition and film boiling regimes. The evaporation time in film boiling region of a sessile ...
  • DETERMINATION OF CO-EFFICIENT OF PERFORMANCE (COP) OF A VAPOR COMPRESSION REFRIGERATION CYCLE USING LIQUEFIED PETROLEUM GAS (R-290) AS REFRIGERANT AND COMPARE IT WITH R-134a 
    Tazrin, Capt. Afsana; Reni, Sadia Akter; Sium, Navid Md. (DEPARTMENT OF MECHANICAL ENGINEERING, 2017-12)
    Vapor compression refrigeration system was studied as it is the most widely used refrigeration system especially in small scale of refrigeration application such as in domestic application. Performance of the system ...
  • THERMAL PERFORMANCE ANALYSIS OF DIFFERENT FIN ARRAYS WITH VARIOUS PERFORATIONS UNDER TURBULENT FLOW REGIME 
    Taimoor, Imtiaz; Aankhy, Nazneen Sultana; Khalid, Muzahid Bin (DEPARTMENT OF MECHANICAL ENGINEERING, 2017-12)
    Heat transfer enhancement has been a major concern in modern days in designing heat generating equipment. In the present study an experimental study has been investigated to analyze the thermal performance of plate fin ...
  • Modeling and fabrication of solar updraft tower and estimation of power generation with respect to Bangladesh 
    Ayub, Fayrouz; Khan, Arafat Sultan; Akhand, Saarah (DEPARTMENT OF MECHANICAL ENGINEERING, 2017-01)
    In our studies we focused on area of sourcing, converting and delivering sustainable energy. Concentrating at the potential role of solar power. Power generation through a solar updraft tower (SUT) has been a promising ...
  • Droplet Evaporation and Leidenfrost Phenomena on Metallic Surfaces 
    Dey, Dhiman; Ahmed, Shariba; Anam, Md. Iftekhar (DEPARTMENT OF MECHANICAL ENGINEERING, MILITARY INSTITUTE OF SCIENCE AND TECHNOLOGY MIRPUR CANTONMENT, DHAKA - 1216, BANGLADESH, 2017-12)
    This experiment presents a detailed and thorough parametric study of the Leidenfrost point which serves as the boundary of the transition and film boiling regimes. The evaporation time in film boiling region of a sessile ...
  • PERFORMANCE STUDY OF PV PANEL WITH WATER COOLING 
    Bhuyan, Ayesha; Mumu, Tazeen Afrin; Smrity, Araf Mim Ahmed (DEPARTMENT OF MECHANICAL ENGINEERING, MILITARY INSTITUTE OF SCIENCE AND TECHNOLOGY MIRPUR CANTONMENT, DHAKA - 1216, BANGLADESH, 2017-12)
    In photovoltaic system energy conversion efficiency is low. Furthermore, during the long operational period of solar cells, their energy conversion efficiency decreases even more due to increase in operating cell temperature ...
  • DESIGN OF CENTRAL AIR CONDITIONING SYSTEM FOR MIST TOWER BUILDING-2 
    Noman, Mashruf Ahmad; Rafique, Maimuna Torsa; Toma, Prionkari Banik (DEPARTMENT OF MECHANICAL ENGINEERING MILITARY INSTITUTE OF SCIENCE AND TECHNOLOGY MIRPUR CANTONMENT, DHAKA - 1216, BANGLADESH, 2017-01)
    In perspective of power consumption in the sector of energy in Bangladesh the central air conditioning system is a desirable solution nowadays. The purpose of this thesis is to design a central air conditioning system ...
  • FULL DUPLEX UPLINK COMMUNICATION EXPLOITING DISTRIBUTED ANTENNA SYSTEM FOR 5TH GENERATION CELLULAR NETWORK 
    Mimi, Rubaiyat Sharmin; Rabeya, Syeda; Chowdhury, Ruhin (Dept. of Electrical and Electronic Engineering, 2017)
    Rapid growth of consumer demand for worldwide wireless communication has motivated the development of fifth generation mobile communication system which is 5G. It has encouraged higher frequency range with better service ...
  • PERFORMANCE EVALUATION AND NUMERICAL SIMULATION OF AN IC ENGINE FOR DIFFERENT BIODIESEL BLENDS 
    MAMUN, MALIHA; RAHMAN, FARIHA BINTHE; NAZNIN, SADIA (DEPARTMENT OF MECHANICAL ENGINEERING, 2017-01)
  • PRESERVATION OF MEDICINES & VACCINES BY THERMOELECTRIC (PELTIER) REFRIGERATION UNIT IN BANGLADESH PERSPECTIVE 
    Islam, Md. Shariful; Alam, Afifa; Kamal, S.M. Mahmud (Department of Mechanical Engineering, 2017-01)
    The increase in demand for refrigeration globally in the field of air-conditioning, food preservation, medical services, vaccine storages, and for electronic components temperature control, led to the production of more ...
  • EXPERIMENTAL INVESTIGATION ON THE CHARACTERISTICS OF A CLOSED LOOP PULSATING HEAT PIPE (CLPHP) FOR DIFFERENT FLUIDS 
    Paul, Lt Shourav Kumar; Hasan, Tasnimul; Bari, Iffat Ara (DEPARTMENT OF MECHANICAL ENGINEERING MILITARY INSTITUTE OF SCIENCE AND TECHNOLOGY MIRPUR CANTONMENT, DHAKA - 1216, BANGLADESH, 2017-12)
    Thermal control is an important topic for thermal management of small electrical and electronic devices. Closed loop pulsating heat pipe (CLPHP) is emerging as the best solution for thermal control. The aim of this ...
  • STRUCTURAL DESIGN, ANALYSIS AND FLIGHT TEST OF AN UNMANNED AERIAL VEHICLE (UAV) HAVING AEROFOIL SHAPED FUSELAGE 
    Rahman, Irfanur; Asaduzzaman, K. M.; Arman, Arif (Department of Mechanical Engineering (ME) Military Institute of Science and Technology (MIST), 2014-12)
    The principal objective of this project is to design and manufacture an UAV having an aerofoil shaped fuselage. The project includes potential study of the advantages of aerofoil shaped fuselage and aerofoil shaped horizontal ...
  • DESIGN AND PERFORMANCE ANALYSIS OF A MICROCONTROLLER BASED NATURAL AIR COOLING SYSTEM FOR STANDBY LOAD 
    Sady, LT Saeed; Murshed, Rubaiya; Hasan, MD. Jahid; Barua, Jibak (DEPARTMENT OF MECHANICAL ENGINEERING MILITARY INSTITUTE OF SCIENCE & TECHNOLOGY (MIST) MIRPUR CANTONMENT, MIRPUR-12, DHAKA, 2014-12)
    People of our country are not so rich that they can afford to buy air conditioner for their comfort. Moreover our atmospheric condition is not good at all. Average temperature is varying 31-33˚C. During summer it is gone ...
  • DESIGN, OPTIMIZATION AND PERFORMANCE EVALUATION OF A SOLAR HEAT COLLECTOR TROUGH AUTOMATED DATA ACQUIZITION SYSTEM 
    Ibne Shahid, Nashid; Mobashwer Indaleeb, Mustahseen; Akramul Haque, Dewan (Department of Mechanical Engineering, Military Institute of Science and Technology (MIST), 2012-12)
    From the very beginning of the 21st century, the world is craving towards technological advancement. Every continent, every country is fighting for their survival through technology to make their future predictable and ...
  • INVESTIGATION OF DRAG ANALYSIS OF FOUR DIFFERENT PROFILES TESTED AT SUBSONIC WIND TUNNEL 
    SHEHAB BIN SAYEED, CAPTAIN; MORSHED, MUNZARIN; SYED ABDULLAH AL MAMUN, FLYING OFFICER (Department of Mechanical Engineering, Military Institute of Science and Technology (MIST), 2013-12)
    The amount of drag produced significantly depends on shape. This investigation deals with the drag analysis of four different profiles, which are cylinder, sphere, symmetrical aerofoil (NACA 0015) and cambered aerofoil ...
  • DESIGN AND FABRICATION OF REMOTE CONTROLLED ROBOTIC ARM FOR SHIPMENT OF CHEMICALLY HAZARDOUS WASTE MATERIALS IN FACTORY 
    Ahmed Antu, Imran; Rahman Turza, Nahidur; Emran Hossain, Kazi Md. (Department of Mechanical Engineering, Military Institute of Science & Technology (MIST), 2013-12)
    Every year many workers are injured, become ill or are killed because of exposure to harmful chemical substances. These incidents cause human suffering, loss of production and high medical cost. This robotic arm aims to ...
  • Development of an Integrated Control System for a Humanoid Robot 
    Zaman, Rahid-uz-; Rahman, Miftahur; Bhuiyan, Yeasin Arafat (Department of Mechanical Engineering Military Institute of Science and Technology (MIST) Mirpur Cantonment, Dhaka, Bangladesh., 2013-12)
    Humanoid robot is a huge field for modern robotics research. Many renowned organizations and intellectuals are still working on it. Some outcome of their long term research are ASIMO by Honda, NAO by Aldebaran, HUBO by ...
  • Prospect of tidal energy in Bangladesh 
    Rahman, Md. Mahbubur; Hasan Walid, Md. Minul; Hasan, S.M. Mahmudul; Islam, Md. Ariful (Department of Mechanical Engineering, Military Institute of Science & Technology, 2013-12)
    Tidal energy is one of the cheapest energy that we find naturally like wind energy & solar energy. The source of this energy is water tide. Tidal energy conversion techniques exploit the natural rise and fall of the level ...
  • Design and Fabrication of Humanoid Robot to Attain Human-Like Movements 
    Rahman Mizan, Md. Mizanur; Masud Saquib, Raihan; Abdullah, Fardan (Department of Mechanical Engineering, Military Institute of Science and Technology (MIST), 2013-12)
    This thesis paper analyze the flexibility of humanoid robot structure design based on design parameters of degree of freedoms and joint angle range characteristic. As a result it helps to identify elements that provide ...
  • Design and Fabrication of Humanoid Robot to Attain Human-Like Movements 
    Rahman Mizan, Md. Mizanur; Masud Saquib, Raihan; Abdullah, Fardan (Department of Mechanical Engineering Military Institute of Science and Technology (MIST), 2013-12)
    This thesis paper analyze the flexibility of humanoid robot structure design based on design parameters of degree of freedoms and joint angle range characteristic. As a result it helps to identify elements that provide ...

Search DSpace


Advanced Search

Browse

My Account